1-3kg/H Output Plastic Pelletizer Machine For Lab Masterbatch
Making Gray Color
Application:
According to buyer's different requirents , we design and make
granulating machine .
there are so many kinds of plastic materials , same machine's
capacity also different.
the machine's different showing on the following characters:
A. extruder. according to different material and processing need,
we have single screw extruder, conical screw extruder , parallel
twin screw extruder , double stage extruders.
B. cutting . according to different material and processing need ,
we have water cooling strips (noddle) cutter method,
water circu cooling cutting method, air cool hot cutting method ,
and others.
when we offer you the machine , we will make the proposal according
to your materials and your capacity need. the followng is some
introduction of the machines.
Feature :
1. Small size, easy for moving , lower consumption , high
efficiency
2. Almost all the machine can be removed and installed easily. Easy
for maintance.
3. All the electric brands are all International famous brand. And
have one year warranty.
4. Small line, for both production and lab.
5. Can test different materials.
6. imported brand control parts , ABB, RKC,OMRON ,SIEMENS ,FUJI
7. 1 year warranty time , 24 hours service after sale
Detailes
| | specifications |
| 1 | Single-screw extruder lab | performance from 1 to 3 kg per hour. Should mix different polymers
in different forms - powder, granules.. |
| | The kit should include: |
| 1.1 | The drive unit and the control unit | Drive and control unit must be mounted in a single cabinet.
Derivation of the drive must be connected single screw extruder
unit.
Specifications are as follows:
Power induction motor 1.1 kW;
Changing the speed of the motor should be performed by an
electronic frequency converter 3 to 150 rev / min;
The maximum temperature 350 C;
The number of heating zones of the extruder 2;
The number of heating zones of the head 1;
Type temperature controller to be digital;
The temperature measurement made of low mass thermocouple type K
The total power 2.5 kW;
Power supply voltage 380 V, 50 Hz;
Accessories: Brushes / Tools;
The weight 100 kg;
The dimensions should be as follows: a width 520 mm; height is 520
mm; length of 520 mm. |
| 1.2 | single -screw laboratory extruder unit | Specifications are as follows:
The number of screws 1;
Screw diameter 25 mm;
The length of the screw: 28:1;
There must be a one-way rotation of the screw;
The maximum temperature 350 C.
The number of heating zones of the extruder 2;
The number of heating zones of the head 1;
Must be an annular ceramic heater heating system;
screw and barrel: Hardened steel;
It must be cooled feed zone;
There is a degassing zone;
Hopper 1.2 liters;
The hopper material is stainless steel. |
| 1.3 | control system | Independent control box
ABB inverter , siemens contacter , omron temperature controller
jiangyin brand gearbox , zhoushan brand screw and barrel , jiangsu
xindali brand motor ,ceramic heater ,40Cr steel mold ,304stainless
steel water cooling tank , matched with force fan cooling ,
pelletizer blade is 9CrSi steel material , pellet cutting speed
controlled by ABB inverter .
adopt removable machine design , easy and safe operation , long use
life
1 year warranty time , 24 hours service after sale |
